IEC - Common Data Dictionary (CDD)

	PROPERTY
Code:	0112/2///61360_4#AAG001
Version:	003
Revision:	01
IRDI:	0112/2///61360_4#AAG001#003
Preferred name:	seated height
Synonymous name:
Symbol:	A
Synonymous symbol:
Short name:	A
Definition:	distance as specified by level (miNomax) of the furthest part of the component above the seating plane, measured in a direction perpendicular to the plane
Note:
Remark:
Primary unit:	m
Alternative units:
Level:
Data type:	LEVEL(MIN,MAX,NOM) OF REAL_MEASURE_TYPE
Format:	NR3..3.3ES2
Property constraint:
Definition source:	BS3934 issue 1 : 1975
Property data element type:	NON_DEPENDENT_P_DET
Drawing:
Formula in text:
Value list code:
Value list:
DET class:	T03
Applicable classes:	0112/2///61360_4#AAA393 - formed lead 0112/2///61360_4#AAA392 - straight lead 0112/2///61360_4#AAA398 - straight leads in line 0112/2///61360_4#AAA397 - lead on a circle 0112/2///61360_4#AAA455 - cavity up 0112/2///61360_4#AAA456 - cavity down 0112/2///61360_4#AAA399 - formed leads in line 0112/2///61360_4#AAA450 - clamp mount package 0112/2///61360_4#AAA449 - top hat package 0112/2///61360_4#AAA454 - non-bumped package 0112/2///61360_4#AAA451 - stud mount package 0112/2///61360_4#AAA453 - stud mount package 0112/2///61360_4#AAA452 - clamp mount package 0112/2///61360_4#AAA441 - multiple leads 0112/2///61360_4#AAA442 - three leads 0112/2///61360_4#AAA446 - non-cavity package (moulded) 0112/2///61360_4#AAA447 - cavity package (ceramic) 0112/2///61360_4#AAA444 - two leads, stubs and tabs 0112/2///61360_4#AAA445 - non-bumped package 0112/2///61360_4#AAA435 - strip lead 0112/2///61360_4#AAA436 - off-set lead 0112/2///61360_4#AAA434 - one lead no tag 0112/2///61360_4#AAA439 - standard form 0112/2///61360_4#AAA440 - standard form 0112/2///61360_4#AAA437 - straight lead 0112/2///61360_4#AAA438 - formed lead 0112/2///61360_4#AAA429 - one fixed tag 0112/2///61360_4#AAA421 - round pin 0112/2///61360_4#AAA423 - standard form 0112/2///61360_4#AAA422 - rectangular pin 0112/2///61360_4#AAA417 - straight flat lead 0112/2///61360_4#AAA419 - solder ball 0112/2///61360_4#AAA410 - offset lead 0112/2///61360_4#AAA411 - leads on a circle 0112/2///61360_4#AAA408 - straight lead 0112/2///61360_4#AAA409 - formed lead 0112/2///61360_4#AAA414 - straight v-section lead 0112/2///61360_4#AAA412 - round pin 0112/2///61360_4#AAA413 - straight flat lead 0112/2///61360_4#AAA403 - straight lead 0112/2///61360_4#AAA400 - leads on a square grid 0112/2///61360_4#AAA401 - offset lead 0112/2///61360_4#AAA404 - straight lead
Definition class:	0112/2///61360_4#AAA303
Code for unit:	0112/2///62720#UAA726 - metre
Codes for alternative units:
Code for unit list:
Status level:	Standard
Is deprecated:
Published in:	IEC 61360-4
Published by:	IEC
Proposal date:	2024-07-10
Version initiation date:	2003-02-21
Version release date:	2024-07-10
Revision release date:	2024-07-10
Obsolete date:
Responsible Committee:	IEC/SC 3D
Conditions:	-
Change request ID:	C00162
Version history: Version history:	003-01 (2024-07-10 14:02:47 by BATCH 00001305) standard

	PROPRIÉTÉ
Code:	0112/2///61360_4#AAG001
Version:	003
Révision:	01
IRDI:	0112/2///61360_4#AAG001#003
Nom préféré:
Nom synonyme:
Symbole:	A
Symbole synonyme:
Nom court:
Définition:
Note:
Remarque:
Traducteur:
Version de traduction:
Date de traduction:
Unité primaire:	m
Unités alternatives:
Niveau:
Type de données:	LEVEL(MIN,MAX,NOM) OF REAL_MEASURE_TYPE
Format:	NR3..3.3ES2
Property constraint:
Source de définition:	BS3934 issue 1 : 1975
Property data element type:	NON_DEPENDENT_P_DET
Dessin:
Formule:
Value list code:
Liste de valeurs:
Classe DET:	T03
Classes applicables:	0112/2///61360_4#AAA393 - formed lead 0112/2///61360_4#AAA392 - straight lead 0112/2///61360_4#AAA398 - straight leads in line 0112/2///61360_4#AAA397 - lead on a circle 0112/2///61360_4#AAA455 - cavity up 0112/2///61360_4#AAA456 - cavity down 0112/2///61360_4#AAA399 - formed leads in line 0112/2///61360_4#AAA450 - clamp mount package 0112/2///61360_4#AAA449 - top hat package 0112/2///61360_4#AAA454 - non-bumped package 0112/2///61360_4#AAA451 - stud mount package 0112/2///61360_4#AAA453 - stud mount package 0112/2///61360_4#AAA452 - clamp mount package 0112/2///61360_4#AAA441 - multiple leads 0112/2///61360_4#AAA442 - three leads 0112/2///61360_4#AAA446 - non-cavity package (moulded) 0112/2///61360_4#AAA447 - cavity package (ceramic) 0112/2///61360_4#AAA444 - two leads, stubs and tabs 0112/2///61360_4#AAA445 - non-bumped package 0112/2///61360_4#AAA435 - strip lead 0112/2///61360_4#AAA436 - off-set lead 0112/2///61360_4#AAA434 - one lead no tag 0112/2///61360_4#AAA439 - standard form 0112/2///61360_4#AAA440 - standard form 0112/2///61360_4#AAA437 - straight lead 0112/2///61360_4#AAA438 - formed lead 0112/2///61360_4#AAA429 - one fixed tag 0112/2///61360_4#AAA421 - round pin 0112/2///61360_4#AAA423 - standard form 0112/2///61360_4#AAA422 - rectangular pin 0112/2///61360_4#AAA417 - straight flat lead 0112/2///61360_4#AAA419 - solder ball 0112/2///61360_4#AAA410 - offset lead 0112/2///61360_4#AAA411 - leads on a circle 0112/2///61360_4#AAA408 - straight lead 0112/2///61360_4#AAA409 - formed lead 0112/2///61360_4#AAA414 - straight v-section lead 0112/2///61360_4#AAA412 - round pin 0112/2///61360_4#AAA413 - straight flat lead 0112/2///61360_4#AAA403 - straight lead 0112/2///61360_4#AAA400 - leads on a square grid 0112/2///61360_4#AAA401 - offset lead 0112/2///61360_4#AAA404 - straight lead
Definition class:	0112/2///61360_4#AAA303
Code for unit:	0112/2///62720#UAA726 - metre
Codes for alternative units:
Code for unit list:
Statut:	Standard
Is deprecated:
Publié dans:	IEC 61360-4
Publié par:	IEC
Date de proposition:	2024-07-10
Version, date d'initialisation:	2003-02-21
Version, date de publication:	2024-07-10
Revision release date:	2024-07-10
Date d'obsolescence:
Responsible Committee:	IEC/SC 3D
Conditions:	-
Change request ID:	C00162
Historique: Historique:	003-01 (2024-07-10 14:02:47 by BATCH 00001305) standard

	MERKMAL
Code:	0112/2///61360_4#AAG001
Version:	003
Revision:	01
IRDI:	0112/2///61360_4#AAG001#003
Bevorzugter Name:
Synonym:
Symbol:	A
Synonymes Symbol:
Kurzbezeichnung:
Definition:
Notiz:
Bemerkung:
Übersetzer:
Übersetzung, Revision:
Übersetzung, Revisionsdatum:
Empfohlene Einheit:	m
Alternative Einheit(en):
Ebene:
Datentyp:	LEVEL(MIN,MAX,NOM) OF REAL_MEASURE_TYPE
Format:	NR3..3.3ES2
Property constraint:
Quelle der Definition:	BS3934 issue 1 : 1975
Property data element type:	NON_DEPENDENT_P_DET
Zeichnung:
Formel:
Value list code:
Werteliste:
Geltungsbereich:	T03
Anwendbare Klassen:	0112/2///61360_4#AAA393 - formed lead 0112/2///61360_4#AAA392 - straight lead 0112/2///61360_4#AAA398 - straight leads in line 0112/2///61360_4#AAA397 - lead on a circle 0112/2///61360_4#AAA455 - cavity up 0112/2///61360_4#AAA456 - cavity down 0112/2///61360_4#AAA399 - formed leads in line 0112/2///61360_4#AAA450 - clamp mount package 0112/2///61360_4#AAA449 - top hat package 0112/2///61360_4#AAA454 - non-bumped package 0112/2///61360_4#AAA451 - stud mount package 0112/2///61360_4#AAA453 - stud mount package 0112/2///61360_4#AAA452 - clamp mount package 0112/2///61360_4#AAA441 - multiple leads 0112/2///61360_4#AAA442 - three leads 0112/2///61360_4#AAA446 - non-cavity package (moulded) 0112/2///61360_4#AAA447 - cavity package (ceramic) 0112/2///61360_4#AAA444 - two leads, stubs and tabs 0112/2///61360_4#AAA445 - non-bumped package 0112/2///61360_4#AAA435 - strip lead 0112/2///61360_4#AAA436 - off-set lead 0112/2///61360_4#AAA434 - one lead no tag 0112/2///61360_4#AAA439 - standard form 0112/2///61360_4#AAA440 - standard form 0112/2///61360_4#AAA437 - straight lead 0112/2///61360_4#AAA438 - formed lead 0112/2///61360_4#AAA429 - one fixed tag 0112/2///61360_4#AAA421 - round pin 0112/2///61360_4#AAA423 - standard form 0112/2///61360_4#AAA422 - rectangular pin 0112/2///61360_4#AAA417 - straight flat lead 0112/2///61360_4#AAA419 - solder ball 0112/2///61360_4#AAA410 - offset lead 0112/2///61360_4#AAA411 - leads on a circle 0112/2///61360_4#AAA408 - straight lead 0112/2///61360_4#AAA409 - formed lead 0112/2///61360_4#AAA414 - straight v-section lead 0112/2///61360_4#AAA412 - round pin 0112/2///61360_4#AAA413 - straight flat lead 0112/2///61360_4#AAA403 - straight lead 0112/2///61360_4#AAA400 - leads on a square grid 0112/2///61360_4#AAA401 - offset lead 0112/2///61360_4#AAA404 - straight lead
Definition class:	0112/2///61360_4#AAA303
Code for unit:	0112/2///62720#UAA726 - metre
Codes for alternative units:
Code for unit list:
Status:	Standard
Is deprecated:
Veröffentlicht in:	IEC 61360-4
Veröffentlicht von:	IEC
Datum des Vorschlags:	2024-07-10
Version, Veranlassungsdatum:	2003-02-21
Version, Freigabedatum:	2024-07-10
Revision release date:	2024-07-10
Gestrichen seit:
Responsible Committee:	IEC/SC 3D
Bedingung(en):	-
Change request ID:	C00162
Historie: Historie:	003-01 (2024-07-10 14:02:47 by BATCH 00001305) standard

	プロパティ（属性）
識別コード:	0112/2///61360_4#AAG001
改訂版:	003
修正刷:	01
IRDI:	0112/2///61360_4#AAG001#003
推奨名:
別名:
記号:	A
同義記号:
略称:
定義:
注記:
備考:
翻訳者:
翻訳第　m 版:
翻訳版発行日:
主用単位:	m
代替単位系:
レベル:
データ型:	LEVEL(MIN,MAX,NOM) OF REAL_MEASURE_TYPE
形式:	NR3..3.3ES2
Property constraint:
定義出典:	BS3934 issue 1 : 1975
Property data element type:	NON_DEPENDENT_P_DET
図:
数式:
Value list code:
値リスト:
ISO 31 プロパティ分類　:	T03
実効クラス:	0112/2///61360_4#AAA393 - formed lead 0112/2///61360_4#AAA392 - straight lead 0112/2///61360_4#AAA398 - straight leads in line 0112/2///61360_4#AAA397 - lead on a circle 0112/2///61360_4#AAA455 - cavity up 0112/2///61360_4#AAA456 - cavity down 0112/2///61360_4#AAA399 - formed leads in line 0112/2///61360_4#AAA450 - clamp mount package 0112/2///61360_4#AAA449 - top hat package 0112/2///61360_4#AAA454 - non-bumped package 0112/2///61360_4#AAA451 - stud mount package 0112/2///61360_4#AAA453 - stud mount package 0112/2///61360_4#AAA452 - clamp mount package 0112/2///61360_4#AAA441 - multiple leads 0112/2///61360_4#AAA442 - three leads 0112/2///61360_4#AAA446 - non-cavity package (moulded) 0112/2///61360_4#AAA447 - cavity package (ceramic) 0112/2///61360_4#AAA444 - two leads, stubs and tabs 0112/2///61360_4#AAA445 - non-bumped package 0112/2///61360_4#AAA435 - strip lead 0112/2///61360_4#AAA436 - off-set lead 0112/2///61360_4#AAA434 - one lead no tag 0112/2///61360_4#AAA439 - standard form 0112/2///61360_4#AAA440 - standard form 0112/2///61360_4#AAA437 - straight lead 0112/2///61360_4#AAA438 - formed lead 0112/2///61360_4#AAA429 - one fixed tag 0112/2///61360_4#AAA421 - round pin 0112/2///61360_4#AAA423 - standard form 0112/2///61360_4#AAA422 - rectangular pin 0112/2///61360_4#AAA417 - straight flat lead 0112/2///61360_4#AAA419 - solder ball 0112/2///61360_4#AAA410 - offset lead 0112/2///61360_4#AAA411 - leads on a circle 0112/2///61360_4#AAA408 - straight lead 0112/2///61360_4#AAA409 - formed lead 0112/2///61360_4#AAA414 - straight v-section lead 0112/2///61360_4#AAA412 - round pin 0112/2///61360_4#AAA413 - straight flat lead 0112/2///61360_4#AAA403 - straight lead 0112/2///61360_4#AAA400 - leads on a square grid 0112/2///61360_4#AAA401 - offset lead 0112/2///61360_4#AAA404 - straight lead
Definition class:	0112/2///61360_4#AAA303
Code for unit:	0112/2///62720#UAA726 - metre
Codes for alternative units:
Code for unit list:
状態:	標準
Is deprecated:
公開:	IEC 61360-4
公開者:	IEC
提案日時:	2024-07-10
初版作成日:	2003-02-21
改訂版公開日:	2024-07-10
Revision release date:	2024-07-10
廃用期日:
Responsible Committee:	IEC/SC 3D
条件:	-
Change request ID:	C00162
版改訂履歴: 版改訂履歴:	003-01 (2024-07-10 14:02:47 by BATCH 00001305) standard

	PROPERTY
代码:	0112/2///61360_4#AAG001
版本号:	003
修订号:	01
IRDI:	0112/2///61360_4#AAG001#003
推荐名:
同义名:
符号:	A
同义符号:
短名:
定义:
注释:
备注:
Translator (to be translated in Chinese):
Translation revison (to be translated in Chinese):
Translation revision date (to be translated in Chinese):
基本单位:	m
替代单位:
层:
Data type:	LEVEL(MIN,MAX,NOM) OF REAL_MEASURE_TYPE
格式:	NR3..3.3ES2
Property constraint:
定义来源:	BS3934 issue 1 : 1975
特性数据元素类型:	NON_DEPENDENT_P_DET
图:
公式:
取值列表代码:
取值列表:
DET类:	T03
适用类:	0112/2///61360_4#AAA393 - formed lead 0112/2///61360_4#AAA392 - straight lead 0112/2///61360_4#AAA398 - straight leads in line 0112/2///61360_4#AAA397 - lead on a circle 0112/2///61360_4#AAA455 - cavity up 0112/2///61360_4#AAA456 - cavity down 0112/2///61360_4#AAA399 - formed leads in line 0112/2///61360_4#AAA450 - clamp mount package 0112/2///61360_4#AAA449 - top hat package 0112/2///61360_4#AAA454 - non-bumped package 0112/2///61360_4#AAA451 - stud mount package 0112/2///61360_4#AAA453 - stud mount package 0112/2///61360_4#AAA452 - clamp mount package 0112/2///61360_4#AAA441 - multiple leads 0112/2///61360_4#AAA442 - three leads 0112/2///61360_4#AAA446 - non-cavity package (moulded) 0112/2///61360_4#AAA447 - cavity package (ceramic) 0112/2///61360_4#AAA444 - two leads, stubs and tabs 0112/2///61360_4#AAA445 - non-bumped package 0112/2///61360_4#AAA435 - strip lead 0112/2///61360_4#AAA436 - off-set lead 0112/2///61360_4#AAA434 - one lead no tag 0112/2///61360_4#AAA439 - standard form 0112/2///61360_4#AAA440 - standard form 0112/2///61360_4#AAA437 - straight lead 0112/2///61360_4#AAA438 - formed lead 0112/2///61360_4#AAA429 - one fixed tag 0112/2///61360_4#AAA421 - round pin 0112/2///61360_4#AAA423 - standard form 0112/2///61360_4#AAA422 - rectangular pin 0112/2///61360_4#AAA417 - straight flat lead 0112/2///61360_4#AAA419 - solder ball 0112/2///61360_4#AAA410 - offset lead 0112/2///61360_4#AAA411 - leads on a circle 0112/2///61360_4#AAA408 - straight lead 0112/2///61360_4#AAA409 - formed lead 0112/2///61360_4#AAA414 - straight v-section lead 0112/2///61360_4#AAA412 - round pin 0112/2///61360_4#AAA413 - straight flat lead 0112/2///61360_4#AAA403 - straight lead 0112/2///61360_4#AAA400 - leads on a square grid 0112/2///61360_4#AAA401 - offset lead 0112/2///61360_4#AAA404 - straight lead
定义类:	0112/2///61360_4#AAA303
单位代码:	0112/2///62720#UAA726 - metre
替代单位代码:
单位列表代码:
状态级别:	Standard (to be translated)
Is deprecated:
发布:	IEC 61360-4
发布者:	IEC
提议日期:	2024-07-10
版本生成日期:	2003-02-21
版本发布日期:	2024-07-10
修订发布日期:	2024-07-10
废止日期:
负责委员会:	IEC/SC 3D
条件:	-
变更请求号:	C00162
版本历史: 版本历史:	003-01 (2024-07-10 14:02:47 by BATCH 00001305) standard