English French German Japanese Chinese


UNIT

Code:
0112/2///62720#UAA775

Version:
001

Revision:
03

IRDI:
0112/2///62720#UAA775#001

Preferred name:
milliampere

Synonymous name:

Short name:
mA

Definition:
0,001-fold of the SI base unit ampere

Note:

Remark:

Definition source:
INTERNATIONAL BUREAU OF WEIGHTS AND MEASURES (BIPM). The International System of Units (SI). 9th editon 2019

Definition class:

Base unit:
0112/2///62720#UAA101 - ampere

Unit structure:
A

Unit in text:
milliampere

Unit in SGML/XML:
<math xmlns="http://www.w3.org/1998/Math/MathML" display="block"> <!-- UAA775 --> <mi mathvariant="normal">mA</mi> </math>
mA

UN/ECE code:
4K

Unit conversion:
<unitsml:Conversions> <unitsml:Float64ConversionFrom xml:id="UAA775-to-UAA101" multiplicand="0.001" divisor="1.0" initialUnit="0112/2///62720#UAA101"/> <unitsml:/Float64ConversionFrom> <unitsml:/Conversions>

Formula:

Data object identifier:

Time stamp:

Applicable properties:
0112/2///61987#ABH399 - maximum discharge to probe
0112/2///61987#ABA062 - base current
0112/2///61987#ABA380 - maximum current
0112/2///61987#ABA378 - minimum current
0112/2///61987#ABA415 - switching current difference
0112/2///61987#ABA579 - current for upper signal on alarm
0112/2///61987#ABA929 - current for lower signal on alarm
0112/2///61987#ABA983 - maximum input current (Ii)
0112/2///61987#ABA988 - maximum output current (Io)
0112/2///61987#ABB156 - current signal level "1"
0112/2///61987#ABB155 - current signal level "0"
0112/2///61987#ABB246 - fault current
0112/2///61987#ABB450 - maximum continuous discharge current of battery
0112/2///61987#ABH566 - value of analog current output
0112/2///61987#ABA374 - upper current limit of proportional range
0112/2///61987#ABA373 - lower current limit of proportional range
0112/2///61987#ABA438 - set lower range end-value of current output
0112/2///61987#ABA063 - start-up current
0112/2///61987#ABA370 - set lower range end-value of current input
0112/2///61987#ABA371 - set upper range end-value of current input
0112/2///61987#ABB089 - measuring current of RTD sensor
0112/2///61987#ABA442 - set upper range end-value of current output
0112/2///61987#ABP093 - accuracy of current measuring instrument
0112/2///61987#ABP145 - measured error of current
0112/2///61987#ABP149 - minimum closed-contact current
0112/2///61987#ABP140 - maximum signal current level for signal "1"
0112/2///61987#ABP139 - maximum signal current level for signal "0"
0112/2///61987#ABP148 - measuring current of resistor sensor
0112/2///61987#ABP130 - maximum measured current
0112/2///61987#ABP128 - maximum leakage current for signal "0"
0112/2///61987#ABP129 - maximum limit of current
0112/2///61987#ABP122 - maximum closed-contact current
0112/2///61987#ABP110 - inaccuracy of current
0112/2///61987#ABP106 - closed-contact current
0112/2///61987#ABP184 - zero point error of current
0112/2///61987#ABP164 - rated input current
0112/2///61987#ABP159 - non-repeatability of current
0112/2///61987#ABP153 - minimum signal current level for signal "0"
0112/2///61987#ABP156 - nominal signal current level
0112/2///61987#ABP154 - minimum signal current level for signal "1"
0112/2///62683#ACE533 - rated operational current, a.c.
0112/2///62683#ACE534 - rated operational current, d.c.
0112/2///62683#ACE537 - OFF-state current
0112/2///62683#ACE538 - ON-state current, minimum
0112/2///62683#ACE338 - range of analogue current signal

Applicable list of units:
0112/2///61987#ABT567 - Electrical current
0112/2///62720#UAD039 - electric current

Status level:
Standard

Published in:

Version initiation date:
2014-02-11

Version release date:
2014-02-11

Revision release date:
2023-07-24

Responsible Committee:
IEC/SC 3D

Change request ID:
C00124


001-03 (2023-11-07 12:19:46 by BATCH 00001255) standard


UNIT

Code:
0112/2///62720#UAA775

Version:
001

Révision:
03

IRDI:
0112/2///62720#UAA775#001

Nom préféré:

Nom synonyme:

Nom court:

Définition:

Note:

Remarque:

Source de définition:
INTERNATIONAL BUREAU OF WEIGHTS AND MEASURES (BIPM). The International System of Units (SI). 9th editon 2019

Definition class:

Base unit:
0112/2///62720#UAA101 - ampere

Unit structure:
A

Unit in text:
milliampere

Unit in SGML/XML:
<math xmlns="http://www.w3.org/1998/Math/MathML" display="block"> <!-- UAA775 --> <mi mathvariant="normal">mA</mi> </math>

UN/ECE code:
4K

Unit conversion:
<unitsml:Conversions> <unitsml:Float64ConversionFrom xml:id="UAA775-to-UAA101" multiplicand="0.001" divisor="1.0" initialUnit="0112/2///62720#UAA101"/> <unitsml:/Float64ConversionFrom> <unitsml:/Conversions>

Formule:

Data object identifier:

Time stamp:

Applicable properties:
0112/2///61987#ABH399 - maximum discharge to probe
0112/2///61987#ABA062 - courant de base
0112/2///61987#ABA380 - courant maximal
0112/2///61987#ABA378 - courant minimal
0112/2///61987#ABA415 - différence de courant de commutation
0112/2///61987#ABA579 - courant pour signal supérieur sur l'alarme
0112/2///61987#ABA929 - courant pour signal inférieur sur l'alarme
0112/2///61987#ABA983 - courant d'entrée maximal (Ii)
0112/2///61987#ABA988 - courant de sortie maximal (Io)
0112/2///61987#ABB156 - niveau de signal de courant "1"
0112/2///61987#ABB155 - niveau de signal de courant "0"
0112/2///61987#ABB246 - courant de défaut
0112/2///61987#ABB450 - courant de déchargement continu maximal de la batterie
0112/2///61987#ABH566 - value of analog current output
0112/2///61987#ABA374 - limite de courant supérieure d'étendue proportionnelle
0112/2///61987#ABA373 - limite de courant inférieure dans une plage proportionnelle
0112/2///61987#ABA438 - valeur inférieure d'extrémité de plage de la sortie de courant
0112/2///61987#ABA063 - courant de démarrage
0112/2///61987#ABA370 - valeur inférieure d'extrémité de plage de l'entrée de courant
0112/2///61987#ABA371 - valeur d'extrémité supérieure d'étendue d'entrée de courant
0112/2///61987#ABB089 - courant de capteur SR
0112/2///61987#ABA442 - valeur d'extrémité supérieure d'étendue de courant de sortie
0112/2///61987#ABP093 - accuracy of current measuring instrument
0112/2///61987#ABP145 - measured error of current
0112/2///61987#ABP149 - minimum closed-contact current
0112/2///61987#ABP140 - maximum signal current level for signal "1"
0112/2///61987#ABP139 - maximum signal current level for signal "0"
0112/2///61987#ABP148 - measuring current of resistor sensor
0112/2///61987#ABP130 - maximum measured current
0112/2///61987#ABP128 - maximum leakage current for signal "0"
0112/2///61987#ABP129 - maximum limit of current
0112/2///61987#ABP122 - maximum closed-contact current
0112/2///61987#ABP110 - inaccuracy of current
0112/2///61987#ABP106 - closed-contact current
0112/2///61987#ABP184 - zero point error of current
0112/2///61987#ABP164 - rated input current
0112/2///61987#ABP159 - non-repeatability of current
0112/2///61987#ABP153 - minimum signal current level for signal "0"
0112/2///61987#ABP156 - nominal signal current level
0112/2///61987#ABP154 - minimum signal current level for signal "1"
0112/2///62683#ACE533 - courant assigné d'emploi, courant alternatif
0112/2///62683#ACE534 - courant assigné d'emploi, courant continu
0112/2///62683#ACE537 - courant résiduel
0112/2///62683#ACE538 - courant à l'état passant minimum
0112/2///62683#ACE338 - domaine des signaux analogiques en courant

Applicable list of units:
0112/2///61987#ABT567 - Electrical current
0112/2///62720#UAD039 - electric current

Statut:
Standard

Publié dans:

Version, date d'initialisation:
2014-02-11

Version, date de publication:
2014-02-11

Revision release date:
2023-07-24

Responsible Committee:
IEC/SC 3D

Change request ID:
C00124


001-03 (2023-11-07 12:19:46 by BATCH 00001255) standard


UNIT

Code:
0112/2///62720#UAA775

Version:
001

Revision:
03

IRDI:
0112/2///62720#UAA775#001

Bevorzugter Name:

Synonym:

Kurzbezeichnung:

Definition:

Notiz:

Bemerkung:

Quelle der Definition:
INTERNATIONAL BUREAU OF WEIGHTS AND MEASURES (BIPM). The International System of Units (SI). 9th editon 2019

Definition class:

Base unit:
0112/2///62720#UAA101 - ampere

Unit structure:
A

Unit in text:
milliampere

Unit in SGML/XML:
<math xmlns="http://www.w3.org/1998/Math/MathML" display="block"> <!-- UAA775 --> <mi mathvariant="normal">mA</mi> </math>

UN/ECE code:
4K

Unit conversion:
<unitsml:Conversions> <unitsml:Float64ConversionFrom xml:id="UAA775-to-UAA101" multiplicand="0.001" divisor="1.0" initialUnit="0112/2///62720#UAA101"/> <unitsml:/Float64ConversionFrom> <unitsml:/Conversions>

Formel:

Data object identifier:

Time stamp:

Applicable properties:
0112/2///61987#ABH399 - maximale Sensorbelastung
0112/2///61987#ABA062 - Basisstrom
0112/2///61987#ABA380 - maximaler Strom
0112/2///61987#ABA378 - minimaler Strom
0112/2///61987#ABA415 - Schaltstromdifferenz
0112/2///61987#ABA579 - oberes Alarmstromsignal
0112/2///61987#ABA929 - unteres Alarmstromsignal
0112/2///61987#ABA983 - maximaler Eingangsstrom (Ii)
0112/2///61987#ABA988 - maximaler Ausgangsstrom (Io)
0112/2///61987#ABB156 - Stromsignalpegel "1"
0112/2///61987#ABB155 - Stromsignalpegel "0"
0112/2///61987#ABB246 - Fehlerstrom
0112/2///61987#ABB450 - maximaler kontinuierlicher Entladungsstrom der Batterie/des Akkumulators
0112/2///61987#ABH566 - Wert des Analogausgangs
0112/2///61987#ABA374 - oberer Stromgrenzwert des Proportionalbereichs
0112/2///61987#ABA373 - unterer Stromgrenzwert des Proportionalbereichs
0112/2///61987#ABA438 - eingestellter Anfangswert des Stromausgangs
0112/2///61987#ABA063 - Einschaltstrom
0112/2///61987#ABA370 - eingestellter Anfangswert des Stromeingangs
0112/2///61987#ABA371 - eingestellter Endwert des Stromeingangs
0112/2///61987#ABB089 - Sensormess-Strom des WTHs
0112/2///61987#ABA442 - eingestellter Endwert des Stromausgangs
0112/2///61987#ABP093 - Genauigkeit des Strommessgeräts
0112/2///61987#ABP145 - maximale Messabweichung des Stroms
0112/2///61987#ABP149 - minimaler Strom bei geschlossenem Kontakt
0112/2///61987#ABP140 - maximaler Signalstrompegel für Signal "1"
0112/2///61987#ABP139 - maximaler Signalstrompegel für Signal "0"
0112/2///61987#ABP148 - Sensormess-Strom des Widerstandsensors
0112/2///61987#ABP130 - maximal gemessener Strom
0112/2///61987#ABP128 - maximaler Ableitstrom für Signal "0"
0112/2///61987#ABP129 - maximaler Grenzwert des Stroms
0112/2///61987#ABP122 - maximaler Strom bei geschlossenem Kontakt
0112/2///61987#ABP110 - Unsicherheit des Stroms
0112/2///61987#ABP106 - Strom bei geschlossenem Kontakt
0112/2///61987#ABP184 - Messabweichung des Nullpunkts des Stroms
0112/2///61987#ABP164 - Bemessungseingangsstrom
0112/2///61987#ABP159 - Nichtwiederholbarkeit des Stroms
0112/2///61987#ABP153 - minimaler Signalstrompegel für Signal "0"
0112/2///61987#ABP156 - Nennsignalstrompegel
0112/2///61987#ABP154 - minimaler Signalstrompegel für Signal "1"
0112/2///62683#ACE533 - Bemessungsbetriebsstrom, AC
0112/2///62683#ACE534 - Bemessungsbetriebsstrom, DC
0112/2///62683#ACE537 - Reststrom
0112/2///62683#ACE538 - Strom im Ein-Zustand, Minimum
0112/2///62683#ACE338 - Bereich des analogen Stromausgangssignals

Applicable list of units:
0112/2///61987#ABT567 - Elektrischer Strom
0112/2///62720#UAD039 - electric current

Status:
Standard

Veröffentlicht in:

Version, Veranlassungsdatum:
2014-02-11

Version, Freigabedatum:
2014-02-11

Revision release date:
2023-07-24

Responsible Committee:
IEC/SC 3D

Change request ID:
C00124


001-03 (2023-11-07 12:19:46 by BATCH 00001255) standard


UNIT

識別コード:
0112/2///62720#UAA775

改訂版:
001

修正刷:
03

IRDI:
0112/2///62720#UAA775#001

推奨名:

別名:

略称:

定義:

注記:

備考:

定義出典:
INTERNATIONAL BUREAU OF WEIGHTS AND MEASURES (BIPM). The International System of Units (SI). 9th editon 2019

Definition class:

Base unit:
0112/2///62720#UAA101 - ampere

Unit structure:
A

Unit in text:
milliampere

Unit in SGML/XML:
<math xmlns="http://www.w3.org/1998/Math/MathML" display="block"> <!-- UAA775 --> <mi mathvariant="normal">mA</mi> </math>

UN/ECE code:
4K

Unit conversion:
<unitsml:Conversions> <unitsml:Float64ConversionFrom xml:id="UAA775-to-UAA101" multiplicand="0.001" divisor="1.0" initialUnit="0112/2///62720#UAA101"/> <unitsml:/Float64ConversionFrom> <unitsml:/Conversions>

数式:

Data object identifier:

Time stamp:

Applicable properties:
0112/2///61987#ABH399 - maximum discharge to probe
0112/2///61987#ABA062 - base current
0112/2///61987#ABA380 - maximum current
0112/2///61987#ABA378 - minimum current
0112/2///61987#ABA415 - switching current difference
0112/2///61987#ABA579 - current for upper signal on alarm
0112/2///61987#ABA929 - current for lower signal on alarm
0112/2///61987#ABA983 - maximum input current (Ii)
0112/2///61987#ABA988 - maximum output current (Io)
0112/2///61987#ABB156 - current signal level "1"
0112/2///61987#ABB155 - current signal level "0"
0112/2///61987#ABB246 - fault current
0112/2///61987#ABB450 - maximum continuous discharge current of battery
0112/2///61987#ABH566 - value of analog current output
0112/2///61987#ABA374 - upper current limit of proportional range
0112/2///61987#ABA373 - lower current limit of proportional range
0112/2///61987#ABA438 - set lower range end-value of current output
0112/2///61987#ABA063 - start-up current
0112/2///61987#ABA370 - set lower range end-value of current input
0112/2///61987#ABA371 - set upper range end-value of current input
0112/2///61987#ABB089 - measuring current of RTD sensor
0112/2///61987#ABA442 - set upper range end-value of current output
0112/2///61987#ABP093 - accuracy of current measuring instrument
0112/2///61987#ABP145 - measured error of current
0112/2///61987#ABP149 - minimum closed-contact current
0112/2///61987#ABP140 - maximum signal current level for signal "1"
0112/2///61987#ABP139 - maximum signal current level for signal "0"
0112/2///61987#ABP148 - measuring current of resistor sensor
0112/2///61987#ABP130 - maximum measured current
0112/2///61987#ABP128 - maximum leakage current for signal "0"
0112/2///61987#ABP129 - maximum limit of current
0112/2///61987#ABP122 - maximum closed-contact current
0112/2///61987#ABP110 - inaccuracy of current
0112/2///61987#ABP106 - closed-contact current
0112/2///61987#ABP184 - zero point error of current
0112/2///61987#ABP164 - rated input current
0112/2///61987#ABP159 - non-repeatability of current
0112/2///61987#ABP153 - minimum signal current level for signal "0"
0112/2///61987#ABP156 - nominal signal current level
0112/2///61987#ABP154 - minimum signal current level for signal "1"
0112/2///62683#ACE533 - rated operational current, a.c.
0112/2///62683#ACE534 - rated operational current, d.c.
0112/2///62683#ACE537 - OFF-state current
0112/2///62683#ACE538 - ON-state current, minimum
0112/2///62683#ACE338 - range of analogue current signal

Applicable list of units:
0112/2///61987#ABT567 - Electrical current
0112/2///62720#UAD039 - electric current

状態:
標準

公開:

初版作成日:
2014-02-11

改訂版公開日:
2014-02-11

Revision release date:
2023-07-24

Responsible Committee:
IEC/SC 3D

Change request ID:
C00124


001-03 (2023-11-07 12:19:46 by BATCH 00001255) standard


UNIT

代码:
0112/2///62720#UAA775

版本号:
001

修订号:
03

IRDI:
0112/2///62720#UAA775#001

推荐名:

同义名:

短名:

定义:

注释:

备注:

定义来源:
INTERNATIONAL BUREAU OF WEIGHTS AND MEASURES (BIPM). The International System of Units (SI). 9th editon 2019

定义类:

Base unit:
0112/2///62720#UAA101 - ampere

Unit structure:
A

Unit in text:
milliampere

Unit in SGML/XML:
<math xmlns="http://www.w3.org/1998/Math/MathML" display="block"> <!-- UAA775 --> <mi mathvariant="normal">mA</mi> </math>

Unit conversion:
<unitsml:Conversions> <unitsml:Float64ConversionFrom xml:id="UAA775-to-UAA101" multiplicand="0.001" divisor="1.0" initialUnit="0112/2///62720#UAA101"/> <unitsml:/Float64ConversionFrom> <unitsml:/Conversions>

公式:

Data object identifier:

Time stamp:

Applicable properties:
0112/2///61987#ABH399 - maximum discharge to probe
0112/2///61987#ABA062 - base current
0112/2///61987#ABA380 - maximum current
0112/2///61987#ABA378 - minimum current
0112/2///61987#ABA415 - switching current difference
0112/2///61987#ABA579 - current for upper signal on alarm
0112/2///61987#ABA929 - current for lower signal on alarm
0112/2///61987#ABA983 - maximum input current (Ii)
0112/2///61987#ABA988 - maximum output current (Io)
0112/2///61987#ABB156 - current signal level "1"
0112/2///61987#ABB155 - current signal level "0"
0112/2///61987#ABB246 - fault current
0112/2///61987#ABB450 - maximum continuous discharge current of battery
0112/2///61987#ABH566 - value of analog current output
0112/2///61987#ABA374 - upper current limit of proportional range
0112/2///61987#ABA373 - lower current limit of proportional range
0112/2///61987#ABA438 - set lower range end-value of current output
0112/2///61987#ABA063 - start-up current
0112/2///61987#ABA370 - set lower range end-value of current input
0112/2///61987#ABA371 - set upper range end-value of current input
0112/2///61987#ABB089 - measuring current of RTD sensor
0112/2///61987#ABA442 - set upper range end-value of current output
0112/2///61987#ABP093 - accuracy of current measuring instrument
0112/2///61987#ABP145 - measured error of current
0112/2///61987#ABP149 - minimum closed-contact current
0112/2///61987#ABP140 - maximum signal current level for signal "1"
0112/2///61987#ABP139 - maximum signal current level for signal "0"
0112/2///61987#ABP148 - measuring current of resistor sensor
0112/2///61987#ABP130 - maximum measured current
0112/2///61987#ABP128 - maximum leakage current for signal "0"
0112/2///61987#ABP129 - maximum limit of current
0112/2///61987#ABP122 - maximum closed-contact current
0112/2///61987#ABP110 - inaccuracy of current
0112/2///61987#ABP106 - closed-contact current
0112/2///61987#ABP184 - zero point error of current
0112/2///61987#ABP164 - rated input current
0112/2///61987#ABP159 - non-repeatability of current
0112/2///61987#ABP153 - minimum signal current level for signal "0"
0112/2///61987#ABP156 - nominal signal current level
0112/2///61987#ABP154 - minimum signal current level for signal "1"
0112/2///62683#ACE533 - 额定工作电流，a.c.
0112/2///62683#ACE534 - 额定工作电流，d.c.
0112/2///62683#ACE537 - 截止状态电流
0112/2///62683#ACE538 - 最小导通状态电流
0112/2///62683#ACE338 - 模拟电流信号范围

Applicable list of units:
0112/2///61987#ABT567 - Electrical current
0112/2///62720#UAD039 - electric current

状态级别:
Standard (to be translated)

发布:

版本生成日期:
2014-02-11

版本发布日期:
2014-02-11

修订发布日期:
2023-07-24

负责委员会:
IEC/SC 3D

变更请求号:
C00124


001-03 (2023-11-07 12:19:46 by BATCH 00001255) standard

Version history
Historique
Historie
版改訂履歴:
版本历史:
001-03 (2023-11-07 12:19:46 by BATCH 00001255) standard


.....
Web page created 2025-01-12
Copyright © 2025 IEC, Geneva, Switzerland. All rights reserved