Section 811-01: General terms | |
| 811-01-01 | | electric traction | |
| 811-01-02 | | DC traction | |
| 811-01-03 | | single-phase AC traction | |
| 811-01-04 | | three-phase AC traction | |
| 811-01-05 | | thermo-electric traction | |
| 811-01-06 | | battery-electric traction | |
| 811-01-07 | | stored kinetic energy traction | |
| 811-01-08 | | train | |
| 811-01-09 | | high speed line | |
| 811-01-10 | | maximum line speed | |
Section 811-02: Types of vehicle | |
| 811-02-01 | | rolling stock | |
| 811-02-03 | | motor vehicle | |
| 811-02-04 | | traction unit | |
| 811-02-05 | | traction fleet | |
| 811-02-06 | | locomotive | |
| 811-02-07 | | motor coach | |
| 811-02-08 | | motor luggage van | |
| 811-02-09 | | train-unit | |
| 811-02-10 | | trailer | |
| 811-02-11 | | non-driving motor vehicle | |
| 811-02-12 | | multiple unit train | |
| 811-02-13 | | articulated unit | |
| 811-02-14 | | driving trailer | |
| 811-02-15 | | power car | |
| 811-02-16 | | push-pull train | |
| 811-02-17 | | shunting locomotive | |
| 811-02-18 | | hump locomotive | |
| 811-02-19 | | industrial locomotive | |
| 811-02-20 | | small-power locomotive | |
| 811-02-21 | | mine locomotive | |
| 811-02-22 | | barge tractor | |
| 811-02-23 | | twin motor vehicle | |
| 811-02-24 | | triple motor vehicle | |
| 811-02-25 | | DC motor vehicle | |
| 811-02-26 | | single-phase AC motor vehicle | |
| 811-02-27 | | three-phase AC motor vehicle | |
| 811-02-28 | | dual voltage motor vehicle | |
| 811-02-29 | | dual frequency motor vehicle | |
| 811-02-30 | | dual system motor vehicle | |
| 811-02-31 | | multi-system motor vehicle | |
| 811-02-32 | | diesel-electric motor vehicle | |
| 811-02-33 | | turbine motor vehicle, <electric transmission> | |
| 811-02-34 | | rack motor vehicle | |
| 811-02-35 | | coupled-axle locomotive | |
| 811-02-36 | | individual axle drive locomotive | |
| 811-02-37 | | magnetically supported vehicle | |
| 811-02-38 | | air-cushion vehicle | |
| 811-02-39 | | inertia storage vehicle by a flywheel | |
| 811-02-40 | | battery-electric road vehicle | |
| 811-02-41 | | electric tramcar | |
| 811-02-42 | | electric tramway | |
| 811-02-43 | | trolleybus, <vehicle> | |
| 811-02-44 | | driver's cab | |
| 811-02-45 | | driving position | |
| 811-02-46 | | shunting control position | |
| 811-02-47 | | guard's position | |
| 811-02-48 | | trolleybus, <transport system> | |
Section 811-03: Traffic and train loads | |
| 811-03-01 | | traffic, <in railways> | |
| 811-03-02 | | total gross traffic | |
| 811-03-03 | | gross traffic hauled | |
| 811-03-04 | | net traffic | |
| 811-03-05 | | payload, <of a train> | |
| 811-03-06 | | normal load, <of a train-unit> | |
| 811-03-07 | | crush load, <of a train-unit> | |
| 811-03-08 | | trailing load | |
| 811-03-09 | | total gross load, <of a train> | |
| 811-03-10 | | normal load, <of a motor vehicle> | |
| 811-03-11 | | maximum load, <of a motor vehicle> | |
Section 811-04: Methods of use | |
| 811-04-01 | | empty running | |
| 811-04-02 | | light running | |
| 811-04-03 | | coasting | |
| 811-04-04 | | assisted operation | |
| 811-04-05 | | double heading | |
| 811-04-06 | | banking | |
| 811-04-07 | | multiple unit operation | |
| 811-04-08 | | propelling movement | |
| 811-04-09 | | push-pull operation, <in railways> | |
| 811-04-10 | | radio control | |
| 811-04-11 | | driving | |
| 811-04-12 | | manual operation, <in railways> | |
| 811-04-14 | | single-manning | |
| 811-04-15 | | one man operation | |
Section 811-05: Train movement | |
| 811-05-01 | | total train resistance | |
| 811-05-02 | | specific resistance | |
| 811-05-03 | | specific rolling resistance | |
| 811-05-04 | | specific resistance due to curves | |
| 811-05-05 | | specific air resistance | |
| 811-05-06 | | specific resistance on inclined track gradient | |
| 811-05-07 | | allowance for rotating parts | |
| 811-05-08 | | breakaway force | |
| 811-05-09 | | accelerating force | |
| 811-05-10 | | decelerating force | |
| 811-05-11 | | residual acceleration | |
| 811-05-12 | | starting, <of a vehicle> | |
Section 811-06: Braking | |
| 811-06-01 | | braking system | |
| 811-06-02 | | brake type | |
| 811-06-03 | | combined braking | |
| 811-06-04 | | composite braking | |
| 811-06-05 | | blended braking | |
| 811-06-06 | | substitutional braking | |
| 811-06-07 | | holding brake | |
| 811-06-08 | | retarding brake | |
| 811-06-09 | | stopping brake | |
| 811-06-10 | | automatic spot brake | |
| 811-06-11 | | emergency brake | |
| 811-06-12 | | parking brake, <of a vehicle> | |
| 811-06-13 | | anti-slip brake | |
| 811-06-14 | | mechanical braking | |
| 811-06-15 | | compressed air brake | |
| 811-06-16 | | vacuum brake | |
| 811-06-17 | | handbrake | |
| 811-06-18 | | electrically released spring brake | |
| 811-06-19 | | electro-magnetic braking | |
| 811-06-20 | | electro-magnetic friction braking | |
| 811-06-21 | | electro-magnetic track brake | |
| 811-06-22 | | solenoid braking | |
| 811-06-23 | | electric braking | |
| 811-06-24 | | electro-dynamic braking | |
| 811-06-25 | | regenerative braking, <of a vehicle> | |
| 811-06-26 | | resistance braking | |
| 811-06-27 | | electro-dynamic braking independent of line supply | |
| 811-06-28 | | electro-dynamic braking dependent on line supply | |
| 811-06-29 | | electric induction braking | |
| 811-06-30 | | brake control | |
| 811-06-31 | | electro-pneumatic brake control | |
| 811-06-32 | | electro-vacuum brake control | |
| 811-06-33 | | automatic load compensation | |
| 811-06-34 | | electrically controlled brake | |
| 811-06-35 | | braking force | |
| 811-06-36 | | holding brake force | |
| 811-06-37 | | braking characteristic | |
| 811-06-38 | | stable characteristic | |
| 811-06-39 | | unstable characteristic | |
| 811-06-40 | | critical speed in resistance braking | |
| 811-06-41 | | mean deceleration as a function of time | |
| 811-06-42 | | effective deceleration as a function of distance | |
| 811-06-43 | | stopping distance | |
| 811-06-44 | | response time, <of braking> | |
| 811-06-45 | | braking response | |
| 811-06-46 | | magnet valve | |
| 811-06-47 | | variable magnet valve | |
| 811-06-48 | | anti-slip magnet valve | |
| 811-06-49 | | pressure switch | |
Section 811-07: Adhesion | |
| 811-07-01 | | adhesion, <of wheels> | |
| 811-07-02 | | factor of adhesion | |
| 811-07-03 | | anti-slip device | |
| 811-07-04 | | wheel slide protection device | |
| 811-07-05 | | weight transfer | |
| 811-07-06 | | weight transfer compensation device | |
| 811-07-07 | | creep | |
Section 811-08: Riding quality | |
| 811-08-01 | | riding quality | |
| 811-08-02 | | fore-and-aft oscillation | |
| 811-08-03 | | lateral oscillation | |
| 811-08-04 | | bouncing | |
| 811-08-05 | | nosing | |
| 811-08-06 | | pitching | |
| 811-08-07 | | rolling | |
Section 811-09: Gauges | |
| 811-09-01 | | gauge | |
| 811-09-02 | | conductor rail gauge | |
| 811-09-03 | | pantograph clearance gauge | |
| 811-09-04 | | electrification clearance gauge | |
| 811-09-05 | | electrical clearance, <of a contact line> | |
| 811-09-06 | | kinematic envelope | |
| 811-09-07 | | swept envelope | |
Section 811-10: Test categories | |
| 811-10-01 | | acceptance test | |
| 811-10-02 | | running test | |
| 811-10-03 | | stationary test | |
| 811-10-04 | | type test | |
| 811-10-05 | | routine test | |
| 811-10-06 | | sampling test | |
| 811-10-07 | | investigation test | |
Section 811-11: Performance of electric motor vehicles | |
| 811-11-01 | | nominal value | |
| 811-11-02 | | rated value | |
| 811-11-03 | | rating | |
| 811-11-04 | | rating of an electric vehicle | |
| 811-11-05 | | continuous rating | |
| 811-11-06 | | short-duration rating | |
| 811-11-07 | | intermittent rating | |
| 811-11-08 | | continuous quantity | |
| 811-11-09 | | short-duration quantity | |
| 811-11-10 | | balancing speed | |
| 811-11-11 | | average speed between stops | |
| 811-11-12 | | schedule speed | |
| 811-11-13 | | maximum speed, <of a vehicle> | |
| 811-11-14 | | speed at end of notching | |
| 811-11-15 | | base speed | |
| 811-11-16 | | speed restriction | |
| 811-11-17 | | speed ratio | |
| 811-11-18 | | tractive effort, <at the wheel rim> | |
| 811-11-19 | | draw-bar pull | |
| 811-11-20 | | output of a motor vehicle | |
| 811-11-21 | | output at the wheel rim | |
| 811-11-22 | | output at the draw-bar | |
| 811-11-23 | | specific output | |
| 811-11-24 | | specific energy consumption of an electric vehicle | |
| 811-11-25 | | tare mass of a vehicule | |
| 811-11-26 | | mass in working order | |
| 811-11-27 | | axle load | |
| 811-11-28 | | adhesive weight | |
| 811-11-29 | | weight per metre run over buffers | |
| 811-11-30 | | weight per metre run between outer axles | |
| 811-11-31 | | maximum concentrated weight per metre | |
| 811-11-32 | | peak value, <in electric traction> | |
| 811-11-33 | | value before notching | |
| 811-11-34 | | selected value | |
| 811-11-35 | | performance range | |
| 811-11-36 | | operation range | |
Section 811-12: Traction motors | |
| 811-12-01 | | traction motor | |
| 811-12-02 | | double motor | |
| 811-12-03 | | tandem motor | |
| 811-12-04 | | double commutator motor | |
| 811-12-05 | | totally-enclosed motor | |
| 811-12-06 | | ventilated motor | |
| 811-12-07 | | ventilated totally-enclosed motor | |
| 811-12-08 | | self-ventilated motor | |
| 811-12-09 | | force-ventilated motor | |
| 811-12-10 | | motor with combined ventilation | |
| 811-12-11 | | axial ventilation | |
| 811-12-12 | | radial ventilation | |
| 811-12-13 | | series motor | |
| 811-12-14 | | shunt motor | |
| 811-12-15 | | separately excited motor | |
| 811-12-16 | | compound motor | |
| 811-12-17 | | compensated motor | |
| 811-12-18 | | direct current motor | |
| 811-12-19 | | single-phase motor | |
| 811-12-20 | | undulating current motor | |
| 811-12-21 | | pulsed current motor | |
| 811-12-22 | | three-phase motor | |
| 811-12-23 | | polyphase motor | |
| 811-12-24 | | synchronous motor | |
| 811-12-25 | | asynchronous motor | |
| 811-12-26 | | full voltage motor | |
| 811-12-27 | | half-voltage motor | |
| 811-12-28 | | third-voltage motor | |
| 811-12-29 | | simulated series motor | |
Section 811-13: Traction motor characteristic values | |
| 811-13-01 | | motor characteristics, pl | |
| 811-13-02 | | speed, <of a vehicle> | |
| 811-13-03 | | speed, <of a rotating machine> | |
| 811-13-04 | | overspeed, <of a rotating electric machine> | |
| 811-13-05 | | motoring torque | |
| 811-13-06 | | starting torque, <of a traction motor> | |
| 811-13-07 | | peak torque | |
| 811-13-08 | | braking torque, <of a traction motor> | |
| 811-13-09 | | maximum output | |
| 811-13-10 | | starting current, <of a traction motor> | |
| 811-13-11 | | peak current, <of a traction motor> | |
| 811-13-12 | | maximum voltage | |
| 811-13-13 | | minimum voltage | |
| 811-13-14 | | undulating voltage | |
| 811-13-15 | | pulsed voltage | |
| 811-13-16 | | transformer e.m.f., <in an alternating or undulating or pulsed current commutator motor> | |
| 811-13-17 | | mean voltage between segments, <in a commutator machine> | |
| 811-13-18 | | maximum voltage between segments, <in a commutator machine> | |
| 811-13-19 | | full field | |
| 811-13-20 | | weak field | |
| 811-13-21 | | maximum field | |
| 811-13-22 | | minimum field | |
| 811-13-23 | | forced field | |
| 811-13-24 | | field-weakening ratio | |
| 811-13-25 | | effective field ratio | |
| 811-13-26 | | flexibility ratio | |
| 811-13-27 | | main flux | |
| 811-13-28 | | electric loading | |
| 811-13-29 | | peripheral speed | |
| 811-13-30 | | temperature rise limit | |
| 811-13-31 | | limiting temperature, <of an electric traction motor> | |
| 811-13-32 | | ambient air temperature, <for an electric traction motor> | |
| 811-13-33 | | class of insulation | |
| 811-13-34 | | self-excitation, <in electric braking> | |
| 811-13-35 | | pre-excitation | |
| 811-13-36 | | black commutation | |
| 811-13-37 | | black-band test | |
| 811-13-38 | | flashover, <in an electric traction motor> | |
| 811-13-39 | | guaranteed rating | |
Section 811-14: Principal parts of rotating electrical machines | |
| 811-14-01 | | stator | |
| 811-14-02 | | frame, <of a rotating electric machine> | |
| 811-14-03 | | solid frame | |
| 811-14-04 | | laminated frame, <of a rotating electric machine> | |
| 811-14-05 | | lamination, <of a stator or rotor> | |
| 811-14-06 | | main pole | |
| 811-14-07 | | interpole | |
| 811-14-08 | | rotor | |
| 811-14-09 | | armature, <of a rotating electric machine> US | |
| 811-14-10 | | armature, <of a rotor> GB | |
| 811-14-11 | | field system, <of a rotating electric machine> | |
| 811-14-12 | | air gap, <of a rotating machine> | |
| 811-14-13 | | spider, <of a rotating electric machine> | |
| 811-14-14 | | slot, <of a rotating electric machine> | |
| 811-14-15 | | commutator | |
| 811-14-16 | | commutator segment | |
| 811-14-17 | | commutator segment insulation | |
| 811-14-18 | | commutator riser | |
| 811-14-19 | | brush | |
| 811-14-20 | | brush holder | |
| 811-14-21 | | brush ring | |
| 811-14-22 | | slip-ring | |
| 811-14-23 | | end shield | |
| 811-14-24 | | bearing shield | |
| 811-14-25 | | suspension bracket | |
| 811-14-26 | | motor suspension bearing for nose-suspended motor | |
| 811-14-27 | | motor connection box | |
| 811-14-28 | | armature winding, <of an electric machine> | |
| 811-14-29 | | field winding | |
| 811-14-30 | | compensating winding | |
| 811-14-31 | | commutating winding | |
| 811-14-32 | | starting winding | |
Section 811-15: Axle drives | |
| 811-15-01 | | axle-hung motor | |
| 811-15-02 | | frame-mounted motor | |
| 811-15-03 | | bogie-mounted motor | |
| 811-15-04 | | underframe-mounted motor | |
| 811-15-05 | | longitudinally mounted motor | |
| 811-15-06 | | flexible drive | |
| 811-15-07 | | unilateral transmission | |
| 811-15-08 | | bilateral transmission | |
| 811-15-09 | | individual drive | |
| 811-15-10 | | coupled axle drive | |
| 811-15-11 | | rod drive | |
| 811-15-12 | | monomotor drive | |
| 811-15-13 | | quill drive | |
| 811-15-14 | | hollow shaft motor drive | |
| 811-15-15 | | spring drive | |
| 811-15-16 | | rubber spring drive | |
| 811-15-17 | | cardan-shaft drive | |
| 811-15-18 | | floating ring drive | |
| 811-15-19 | | gearless drive | |
| 811-15-20 | | solid gearing | |
| 811-15-21 | | resilient gearing | |
| 811-15-22 | | unilateral gearing | |
| 811-15-23 | | bilateral gearing | |
| 811-15-24 | | single-reduction gearing | |
| 811-15-25 | | double-reduction gearing | |
| 811-15-26 | | worm gear | |
| 811-15-27 | | intermediate-wheel gearing | |
| 811-15-28 | | right-angled drive | |
| 811-15-29 | | gear case | |
| 811-15-30 | | combined rack and adhesion drive | |
| 811-15-31 | | clearance underneath the gear case | |
| 811-15-32 | | gear centre distance | |
| 811-15-33 | | unsprung mass | |
Section 811-16: Linear traction motors | |
| 811-16-01 | | linear traction motor | |
| 811-16-02 | | linear synchronous motor | |
| 811-16-03 | | linear induction motor | |
| 811-16-04 | | field system, <of a linear traction motor> | |
| 811-16-05 | | single-sided field system | |
| 811-16-06 | | double-sided field system | |
| 811-16-07 | | armature of a linear traction motor | |
| 811-16-08 | | reaction rail | |
| 811-16-09 | | thrust of a linear traction motor | |
| 811-16-10 | | vertical force | |
| 811-16-11 | | synchronous speed of a linear traction motor | |
| 811-16-12 | | edge effect, <for an electric machine> | |
| 811-16-13 | | end effect, <for an electric machine> | |
| 811-16-14 | | magnetic drag | |
| 811-16-15 | | slip of a linear traction asynchronous motor | |
| 811-16-16 | | linear reluctance motor | |
| 811-16-17 | | air gap of a linear traction motor | |
| 811-16-18 | | short primary type | |
| 811-16-19 | | electromagnetic suspension | |
Section 811-17: Thermo-electric vehicles | |
| 811-17-01 | | nominal power of a thermo-electric vehicle | |
| 811-17-02 | | useful service output of an internal combustion engine | |
| 811-17-03 | | maximum service output of an internal combustion engine | |
| 811-17-04 | | international rated output of an internal combustion engine | |
| 811-17-05 | | continuous power of an internal combustion engine | |
| 811-17-06 | | overload power of an internal combustion engine | |
| 811-17-07 | | traction output of a thermo-electric vehicle | |
| 811-17-08 | | dimensional output | |
| 811-17-09 | | automatic load regulation equipment | |
| 811-17-10 | | automatic field-weakening | |
| 811-17-11 | | transmission efficiency of a thermo-electric vehicle | |
| 811-17-12 | | specific fuel consumption of a thermo-electric vehicle | |
| 811-17-13 | | minimum idling speed | |
| 811-17-14 | | idling speed | |
| 811-17-15 | | firing speed | |
| 811-17-16 | | overspeed, <of an internal combustion engine> | |
| 811-17-17 | | rated speed | |
| 811-17-18 | | breakaway torque | |
| 811-17-19 | | firing torque | |
| 811-17-20 | | starting up | |
| 811-17-21 | | magnetic coupling, <for an internal combustion engine> | |
| 811-17-22 | | electric transmission | |
| 811-17-23 | | runaway speed of a motor-generator set | |
Section 811-18: Generators for thermo-electric vehicles | |
| 811-18-01 | | DC main generator | |
| 811-18-02 | | main alternator | |
| 811-18-03 | | asynchronous generator, <for an electric machine> | |
| 811-18-04 | | train power supply generator | |
| 811-18-05 | | heating generator | |
| 811-18-06 | | exciter, <for a main generator or alternator> | |
| 811-18-07 | | shaft-end mounted exciter | |
| 811-18-08 | | independently driven exciter | |
Section 811-19: Main and auxiliary converters | |
| 811-19-01 | | convertor | |
| 811-19-02 | | main convertor | |
| 811-19-03 | | auxiliary convertor | |
| 811-19-04 | | rotating convertor | |
| 811-19-05 | | electronic convertor | |
| 811-19-06 | | phase convertor | |
| 811-19-07 | | frequency convertor, <of alternating current> | |
| 811-19-08 | | fixed frequency convertor | |
| 811-19-09 | | variable frequency convertor | |
| 811-19-10 | | DC convertor | |
| 811-19-11 | | chopper | |
| 811-19-12 | | rectifier | |
| 811-19-13 | | inverter, <static> | |
| 811-19-14 | | motor-generator set | |
| 811-19-15 | | auxiliary generator set | |
| 811-19-16 | | dynamic brake exciter | |
Section 811-20: Batteries | |
| 811-20-04 | | operating range, <of an electric vehicle fed by a battery> | |
| 811-20-06 | | charge, <of a cell or battery> | |
| 811-20-07 | | operating cycle, <of a cell or battery> | |
| 811-20-08 | | automatic charge | |
Section 811-21: Compressors and pumps | |
| 811-21-01 | | compressor, <of air> | |
| 811-21-02 | | compressor unit | |
| 811-21-03 | | auxiliary compressor | |
| 811-21-04 | | reciprocating compressor | |
| 811-21-05 | | rotary compressor | |
| 811-21-06 | | exhauster | |
| 811-21-07 | | oil pump | |
| 811-21-08 | | manual air pump | |
Section 811-22: Air cooling | |
| 811-22-01 | | blower | |
| 811-22-02 | | fan set | |
| 811-22-03 | | radial flow fan | |
| 811-22-04 | | axial flow fan | |
| 811-22-05 | | natural ventilation, <in a vehicle> | |
| 811-22-06 | | forced ventilation | |
| 811-22-07 | | self-ventilation | |
Section 811-23: Lighting, heating and air conditioning | |
| 811-23-01 | | multiple coach lighting | |
| 811-23-02 | | individual coach lighting | |
| 811-23-03 | | emergency lighting | |
| 811-23-04 | | headlamp | |
| 811-23-05 | | lighting dynamo | |
| 811-23-06 | | air conditioning | |
| 811-23-07 | | pre-heating of a vehicle | |
| 811-23-08 | | pre-cooling | |
| 811-23-09 | | energy-supply station | |
| 811-23-10 | | heating contactor | |
| 811-23-11 | | heating train line | |
| 811-23-12 | | heating jumper | |
| 811-23-13 | | defroster | |
| 811-23-14 | | demister | |
Section 811-24: Measurement of train speed | |
| 811-24-01 | | axle-driven generator | |
| 811-24-02 | | tacho-generator | |
| 811-24-03 | | tachograph | |
| 811-24-04 | | speedometer | |
| 811-24-05 | | tachometer | |
| 811-24-06 | | speed detecting element | |
| 811-24-07 | | radar speedometer | |
Section 811-25: Circuits and circuit elements | |
| 811-25-01 | | high-voltage circuit | |
| 811-25-02 | | low-voltage circuit | |
| 811-25-03 | | power circuit | |
| 811-25-04 | | braking circuit | |
| 811-25-05 | | auxiliary circuit, <of a train> | |
| 811-25-06 | | train power supply circuit | |
| 811-25-07 | | heating circuit | |
| 811-25-08 | | lighting circuit | |
| 811-25-09 | | battery circuit | |
| 811-25-10 | | starting circuit | |
| 811-25-11 | | instrument circuit | |
| 811-25-12 | | control circuit, <of a train> | |
| 811-25-13 | | interlock circuit | |
| 811-25-14 | | indicating circuit | |
| 811-25-15 | | protective circuit | |
| 811-25-16 | | audio-communication circuit | |
| 811-25-17 | | supply detection circuit | |
| 811-25-18 | | multiplexing | |
| 811-25-19 | | electro-pneumatic brake circuit | |
| 811-25-20 | | cab cable, <of train lines> | |
| 811-25-21 | | train line | |
| 811-25-22 | | bus line | |
| 811-25-23 | | control train line | |
| 811-25-24 | | electric coupler | |
| 811-25-25 | | jumper cable, <between vehicles> | |
| 811-25-26 | | earth-return brush | |
| 811-25-27 | | electric automatic coupler | |
| 811-25-28 | | auxiliary equipment | |
Section 811-26: Power transformers and reactors | |
| 811-26-01 | | power transformer | |
| 811-26-02 | | transformer with radially laminated core | |
| 811-26-03 | | auto-transformer | |
| 811-26-04 | | regulating transformer | |
| 811-26-05 | | booster transformer | |
| 811-26-06 | | tapped transformer | |
| 811-26-07 | | oil-immersed type transformer | |
| 811-26-08 | | dry-type transformer | |
| 811-26-09 | | primary winding, <in electric traction> | |
| 811-26-10 | | secondary winding | |
| 811-26-11 | | train heating winding | |
| 811-26-12 | | auxiliary winding, <of an electric traction transformer> | |
| 811-26-13 | | regulating winding | |
| 811-26-14 | | tapping point | |
| 811-26-15 | | concentric windings | |
| 811-26-16 | | sandwich windings, pl | |
| 811-26-17 | | natural circulation | |
| 811-26-18 | | forced circulation | |
| 811-26-19 | | inductor | |
| 811-26-20 | | transition inductor | |
| 811-26-21 | | smoothing inductor | |
| 811-26-22 | | earthing inductor | |
| 811-26-23 | | braking inductor | |
| 811-26-24 | | inductive shunt | |
| 811-26-25 | | transductor | |
| 811-26-26 | | saturable inductor | |
| 811-26-27 | | air-cored inductor | |
| 811-26-28 | | magnetic circuit, <of a transformer> | |
| 811-26-29 | | magnetic core | |
| 811-26-30 | | yoke, <of a transformer, electro-magnet, relay or other device> | |
| 811-26-31 | | tank | |
| 811-26-32 | | oil conservator | |
| 811-26-33 | | breather | |
| 811-26-34 | | drier | |
| 811-26-35 | | radiator | |
| 811-26-36 | | AC inductance | |
| 811-26-37 | | traction converter transformer | |
| 811-26-38 | | traction inverter transformer | |
Section 811-27: Resistors and capacitors | |
| 811-27-01 | | starting resistor | |
| 811-27-02 | | braking resistor | |
| 811-27-03 | | transition resistor | |
| 811-27-04 | | shunt resistor | |
| 811-27-05 | | charging resistor | |
| 811-27-06 | | damping resistor | |
| 811-27-07 | | excitation resistor | |
| 811-27-08 | | stabilizing resistor | |
| 811-27-09 | | regulating resistor | |
| 811-27-10 | | potentiometer | |
| 811-27-11 | | resistor element | |
| 811-27-12 | | resistor case | |
| 811-27-13 | | resistor block | |
| 811-27-14 | | resistor section | |
| 811-27-15 | | double insulation | |
| 811-27-16 | | non-linear resistor | |
| 811-27-17 | | smoothing capacitor | |
| 811-27-18 | | starting capacitor | |
| 811-27-19 | | commutation capacitor, <in a convertor arm> | |
| 811-27-20 | | protective capacitor | |
| 811-27-21 | | line series capacitor | |
| 811-27-22 | | power factor correction capacitor | |
Section 811-28: Electronics | |
| 811-28-01 | | electronics, <in electric traction> | |
| 811-28-02 | | power electronics | |
| 811-28-03 | | control electronics | |
| 811-28-04 | | controlled rectifier | |
| 811-28-05 | | semi-conductor rectifier | |
| 811-28-07 | | ignitron | |
| 811-28-08 | | excitron | |
| 811-28-09 | | single-way connection, <of a convertor> | |
| 811-28-10 | | double-way connection, <of a convertor> | |
| 811-28-11 | | single-phase bridge rectifier | |
| 811-28-12 | | three-phase bridge rectifier | |
| 811-28-13 | | controlled bridge | |
| 811-28-14 | | symmetric half-controlled bridge | |
| 811-28-15 | | asymmetric half-controlled bridge | |
| 811-28-16 | | asymmetric bridge with external commutation "out" | |
| 811-28-17 | | bridges in cascade | |
| 811-28-18 | | anti-parallel connection | |
| 811-28-19 | | commutation, <in an electronic power converter> | |
| 811-28-20 | | external commutation | |
| 811-28-21 | | angle of overlap | |
| 811-28-22 | | phase control | |
| 811-28-23 | | current delay angle | |
| 811-28-24 | | phase control factor | |
| 811-28-25 | | non-conducting interval, <of an arm> | |
| 811-28-26 | | reverse blocking interval | |
| 811-28-27 | | off-state interval | |
| 811-28-28 | | conducting direction, <of a rectifier element> | |
| 811-28-29 | | inverse direction, <of a rectifier element> | |
| 811-28-30 | | firing | |
| 811-28-31 | | extinction | |
| 811-28-32 | | ripple harmonics of a rectifier | |
| 811-28-33 | | ripple voltage | |
| 811-28-34 | | DC ripple factor | |
| 811-28-35 | | breakthrough | |
| 811-28-36 | | firing failure | |
| 811-28-37 | | commutation failure | |
| 811-28-38 | | load cycle | |
Section 811-29: Switchgear | |
| 811-29-01 | | circuit-breaker | |
| 811-29-02 | | oil circuit-breaker | |
| 811-29-03 | | gas-blast circuit-breaker | |
| 811-29-04 | | air-blast circuit-breaker | |
| 811-29-05 | | vacuum circuit-breaker | |
| 811-29-06 | | DC high-speed circuit-breaker | |
| 811-29-07 | | mechanical contactor | |
| 811-29-08 | | line, adj | |
| 811-29-09 | | electro-magnetic contactor | |
| 811-29-10 | | electro-pneumatic contactor | |
| 811-29-11 | | camshaft contactor | |
| 811-29-12 | | tapping contactor | |
| 811-29-13 | | transition contactor | |
| 811-29-14 | | braking contactor | |
| 811-29-15 | | earthing contactor | |
| 811-29-16 | | contactor group | |
| 811-29-17 | | disconnector | |
| 811-29-18 | | short-circuiting device | |
| 811-29-19 | | switchgroup | |
| 811-29-20 | | power switchgroup | |
| 811-29-21 | | traction motor isolating switch | |
| 811-29-22 | | reverser | |
| 811-29-23 | | disconnecting switch reverser | |
| 811-29-24 | | resistance switchgroup | |
| 811-29-25 | | transition switchgroup | |
| 811-29-26 | | field-weakening switchgroup | |
| 811-29-27 | | power controller | |
| 811-29-28 | | on-load tap-changer, <for traction circuits> | |
| 811-29-29 | | control switchgroup | |
| 811-29-30 | | manual switchgroup | |
| 811-29-31 | | motor-driven switchgroup | |
| 811-29-32 | | drum controller | |
| 811-29-33 | | cam group | |
| 811-29-34 | | interlocking switchgroup | |
| 811-29-35 | | motor-driven controller | |
| 811-29-36 | | master controller | |
| 811-29-37 | | system changeover switch | |
| 811-29-38 | | power/brake changeover switch | |
| 811-29-39 | | standby hand control | |
| 811-29-40 | | sequence chart | |
| 811-29-41 | | voltage-limiting device | |
| 811-29-42 | | semiconductor circuit-breaker | |
| 811-29-43 | | cut off current characteristic | |
| 811-29-44 | | release, <for a circuit-breaker> | |
Section 811-30: Control equipment | |
| 811-30-01 | | automatic traction control equipment | |
| 811-30-02 | | directly controlled equipment | |
| 811-30-03 | | contactor equipment | |
| 811-30-04 | | individual contactor equipment | |
| 811-30-05 | | motor-driven camshaft equipment | |
| 811-30-06 | | variable voltage control | |
| 811-30-07 | | frequency control | |
| 811-30-08 | | pole-changing control | |
| 811-30-09 | | resistance control | |
| 811-30-10 | | auxiliary transformer regulation | |
| 811-30-11 | | chopper control | |
| 811-30-12 | | voltage phase control | |
| 811-30-13 | | high-voltage regulation | |
| 811-30-14 | | low-voltage regulation | |
| 811-30-15 | | continuous control | |
| 811-30-16 | | motor combination | |
| 811-30-17 | | combination transition | |
| 811-30-18 | | shunt transition | |
| 811-30-19 | | bridge transition | |
| 811-30-20 | | balanced bridge transition | |
| 811-30-21 | | field shunting | |
| 811-30-22 | | field-weakening by tapping | |
| 811-30-23 | | combined field-weakening | |
| 811-30-24 | | auxiliary pole shunting | |
| 811-30-25 | | notching ratio | |
| 811-30-26 | | progression of equipment | |
| 811-30-27 | | run-back of equipment | |
| 811-30-28 | | notch | |
| 811-30-29 | | accelerating relay | |
| 811-30-30 | | electrical interlocks | |
| 811-30-31 | | locking contact | |
| 811-30-32 | | control equipment, <in electric traction> | |
Section 811-31: Auxiliary and protective equipment | |
| 811-31-01 | | repeater, <in electric traction> | |
| 811-31-02 | | annunciator | |
| 811-31-03 | | make contact | |
| 811-31-04 | | break contact | |
| 811-31-05 | | indicator, <in electric traction> | |
| 811-31-06 | | indicator light | |
| 811-31-07 | | pilot lamp | |
| 811-31-08 | | driver's safety device | |
| 811-31-09 | | lightning arrester | |
| 811-31-10 | | overvoltage protector | |
| 811-31-11 | | high-voltage fuse | |
| 811-31-12 | | overcurrent relay | |
| 811-31-13 | | overvoltage relay | |
| 811-31-14 | | no-volt relay | |
| 811-31-15 | | earth fault relay, <in electric traction> | |
| 811-31-16 | | differential relay, <in electric traction> | |
Section 811-32: Current collection | |
| 811-32-01 | | current collector | |
| 811-32-02 | | pantograph | |
| 811-32-03 | | bow, <in general usage> | |
| 811-32-04 | | bow, <in tramways> | |
| 811-32-05 | | pantograph head | |
| 811-32-06 | | contact strip | |
| 811-32-07 | | horn, <of a pantograph> | |
| 811-32-08 | | trolley | |
| 811-32-09 | | trolley-wheel | |
| 811-32-10 | | trolley-shield | |
| 811-32-11 | | contact slipper | |
| 811-32-12 | | trolley-head | |
| 811-32-13 | | trolley-pole | |
| 811-32-14 | | trolley-base | |
| 811-32-15 | | trolley-pivot | |
| 811-32-16 | | ropewinder | |
| 811-32-17 | | pole retriever | |
| 811-32-18 | | pole hook | |
| 811-32-19 | | shoegear | |
| 811-32-20 | | collector shoe | |
| 811-32-21 | | pantograph cylinder | |
| 811-32-22 | | pantograph dropping device | |
| 811-32-23 | | working height | |
| 811-32-24 | | pantograph bounce | |
| 811-32-25 | | pantograph damper | |
| 811-32-26 | | pantograph contact pressure | |
| 811-32-27 | | pantograph sway | |
| 811-32-28 | | pantograph head length | |
| 811-32-29 | | pantograph head width | |
| 811-32-30 | | pantograph head height | |
| 811-32-31 | | length of contact strips | |
Section 811-33: Overhead contact line equipment | |
| 811-33-01 | | contact line | |
| 811-33-02 | | overhead contact line | |
| 811-33-03 | | single tramway equipment | |
| 811-33-04 | | double tramway equipment | |
| 811-33-05 | | overhead contact line with catenary suspension | |
| 811-33-06 | | catenary wire | |
| 811-33-07 | | main catenary wire | |
| 811-33-08 | | auxiliary catenary wire | |
| 811-33-09 | | simple catenary equipment with single contact wire | |
| 811-33-10 | | simple catenary equipment with twin contact wires | |
| 811-33-11 | | double catenary equipment | |
| 811-33-12 | | compound catenary equipment | |
| 811-33-13 | | inclined catenary | |
| 811-33-14 | | polygonal equipment | |
| 811-33-15 | | contact wire | |
| 811-33-16 | | by-pass feeder | |
| 811-33-17 | | stitched catenary suspension | |
| 811-33-18 | | stitch wire | |
| 811-33-19 | | supports, <in electric traction> pl | |
| 811-33-20 | | mast, <in electric traction> | |
| 811-33-21 | | stagger | |
| 811-33-22 | | dropper, <of overhead contact line> | |
| 811-33-23 | | contact wire splice | |
| 811-33-24 | | suspension clamp, <of overhead contact line> | |
| 811-33-25 | | connector, <of electric conductors> | |
| 811-33-26 | | termination fitting | |
| 811-33-27 | | pin insulator, <in electric traction> | |
| 811-33-28 | | suspension insulator, <in electric traction> | |
| 811-33-29 | | strain insulator, <in electric traction> | |
| 811-33-30 | | cantilever, <in electric traction> | |
| 811-33-31 | | hinged cantilever | |
| 811-33-32 | | rigid support | |
| 811-33-33 | | flexible support | |
| 811-33-34 | | cross-span | |
| 811-33-35 | | pull-off | |
| 811-33-36 | | registration arm | |
| 811-33-37 | | steady arm | |
| 811-33-38 | | portal structure, <in electric traction> | |
| 811-33-39 | | head-span suspension | |
| 811-33-40 | | span, <of overhead contact line> | |
| 811-33-41 | | overhead crossing | |
| 811-33-42 | | frog, <for tramway or trolleybus> | |
| 811-33-43 | | cross-over junction, <for tramway or trolleybus> | |
| 811-33-44 | | tangential junction, <for tramway or trolleybus> | |
| 811-33-45 | | tensioner | |
| 811-33-46 | | automatic tensioner | |
| 811-33-47 | | stay, <in electric traction> | |
| 811-33-48 | | balance weight tensioner | |
| 811-33-49 | | auto-tensioned conductor | |
| 811-33-50 | | fixed termination conductor | |
| 811-33-51 | | hard spot | |
| 811-33-52 | | system height | |
| 811-33-53 | | lateral elasticity | |
| 811-33-54 | | vertical elasticity | |
| 811-33-55 | | catenary sag | |
| 811-33-56 | | contact wire sag | |
| 811-33-57 | | contact wire pre-sag | |
| 811-33-58 | | lightning protection cable, <in electric traction> | |
| 811-33-59 | | contact line system | |
| 811-33-60 | | reinforcing feeder | |
| 811-33-61 | | tension length | |
| 811-33-62 | | contact wire height | |
| 811-33-63 | | nominal contact wire height | |
| 811-33-64 | | minimum contact wire height | |
| 811-33-65 | | maximum contact wire height | |
Section 811-34: Conductor rails | |
| 811-34-01 | | conductor rail | |
| 811-34-06 | | conductor rail gap | |
| 811-34-07 | | conductor rail ramp | |
| 811-34-08 | | conductor rail anchor | |
| 811-34-09 | | track jumper cable | |
| 811-34-10 | | return conductor rail | |
Section 811-35: Return current circuits | |
| 811-35-01 | | return circuit | |
| 811-35-02 | | track return system | |
| 811-35-03 | | insulated return system | |
| 811-35-04 | | return cable | |
| 811-35-05 | | stray current, <in electric traction> | |
| 811-35-07 | | rail joint bond | |
| 811-35-08 | | welded bond | |
| 811-35-09 | | pin-type bond | |
| 811-35-10 | | electrical rail joint | |
| 811-35-11 | | insulated rail joint | |
| 811-35-12 | | earth wire, <in electric traction> | |
| 811-35-13 | | return conductor | |
| 811-35-14 | | closed formation | |
| 811-35-15 | | open formation | |
Section 811-36: Electricity supply system | |
| 811-36-01 | | feeding system | |
| 811-36-02 | | traction substation, <in electric traction> | |
| 811-36-03 | | transformer substation, <in electric traction> | |
| 811-36-04 | | rectifier substation | |
| 811-36-05 | | mobile substation | |
| 811-36-06 | | receptive substation | |
| 811-36-07 | | feeder station | |
| 811-36-08 | | feeder, <in electric traction> | |
| 811-36-09 | | line feeder | |
| 811-36-10 | | sectioning | |
| 811-36-11 | | sectioning point | |
| 811-36-12 | | auto-transformer substation, <in electric traction> | |
| 811-36-13 | | track sectioning cabin, <in electric traction> | |
| 811-36-14 | | insulated overlap | |
| 811-36-15 | | section insulator | |
| 811-36-16 | | neutral section | |
| 811-36-17 | | independence of tracks | |
| 811-36-18 | | feeder clamp | |
| 811-36-19 | | dual system track | |
| 811-36-20 | | voltage variation | |
| 811-36-21 | | electric traction system | |
| 811-36-22 | | switching station | |
| 811-36-23 | | live part, <in electric traction> | |
| 811-36-24 | | along-track feeder | |
| 811-36-25 | | feeding section | |
| 811-36-26 | | feeding point | |
| 811-36-27 | | interconnecting circuit-breaker | |
Section 811-37: Train communication network | |
| 811-37-01 | | address, <in a train communication network> | |
| 811-37-02 | | agent | |
| 811-37-03 | | application layer | |
| 811-37-04 | | application layer interface | |
| 811-37-05 | | application process | |
| 811-37-06 | | basic period | |
| 811-37-07 | | big-endian | |
| 811-37-08 | | bit-stuffing | |
| 811-37-09 | | bridge, <in a train communication network> | |
| 811-37-10 | | broadcast | |
| 811-37-11 | | bus administrator | |
| 811-37-12 | | bus switch | |
| 811-37-13 | | caller | |
| 811-37-14 | | check offset | |
| 811-37-15 | | check sequence | |
| 811-37-16 | | check variable | |
| 811-37-17 | | closed train | |
| 811-37-18 | | communication device | |
| 811-37-19 | | composition | |
| 811-37-20 | | consist | |
| 811-37-21 | | consist network | |
| 811-37-22 | | consist switch | |
| 811-37-23 | | consistency, <in a train communication network> | |
| 811-37-24 | | consumer, <in a train communication network> | |
| 811-37-25 | | conversation, <in a train communication network> | |
| 811-37-26 | | datagram | |
| 811-37-27 | | dataset | |
| 811-37-28 | | delimiter | |
| 811-37-29 | | destination device | |
| 811-37-30 | | device, <in a train communication network> | |
| 811-37-31 | | device address | |
| 811-37-32 | | end delimiter | |
| 811-37-33 | | end device | |
| 811-37-34 | | end node | |
| 811-37-35 | | extension box | |
| 811-37-36 | | extension cable | |
| 811-37-37 | | F code | |
| 811-37-38 | | field device | |
| 811-37-39 | | flag | |
| 811-37-40 | | frame, <in a train communication network> | |
| 811-37-41 | | frame check sequence | |
| 811-37-42 | | frame data | |
| 811-37-43 | | fritting | |
| 811-37-44 | | gateway, <in a train communication network> | |
| 811-37-45 | | group address | |
| 811-37-46 | | group directory | |
| 811-37-47 | | HDLC | |
| 811-37-48 | | inauguration | |
| 811-37-49 | | intermediate node | |
| 811-37-50 | | line unit | |
| 811-37-51 | | linear topology | |
| 811-37-52 | | link address | |
| 811-37-53 | | link control | |
| 811-37-54 | | link data | |
| 811-37-55 | | link header | |
| 811-37-56 | | link layer | |
| 811-37-57 | | link layer lnterface | |
| 811-37-58 | | link layer management | |
| 811-37-59 | | little-endian | |
| 811-37-60 | | local area network, <in a train communication network> | |
| 811-37-61 | | logical address | |
| 811-37-62 | | master | |
| 811-37-63 | | master frame | |
| 811-37-64 | | message data | |
| 811-37-65 | | messenger, <in a train communication network> | |
| 811-37-66 | | multicast | |
| 811-37-67 | | MVB | |
| 811-37-68 | | network, <in a train communication network> | |
| 811-37-69 | | network address | |
| 811-37-70 | | network device | |
| 811-37-71 | | network header | |
| 811-37-72 | | network layer | |
| 811-37-73 | | network management, <in a train communication network> | |
| 811-37-74 | | node, <in a train communication network> | |
| 811-37-75 | | node address | |
| 811-37-76 | | node descriptor | |
| 811-37-77 | | node directory | |
| 811-37-78 | | node key | |
| 811-37-79 | | open train | |
| 811-37-80 | | physical address | |
| 811-37-81 | | physical port | |
| 811-37-82 | | polling, <in a train communication network> | |
| 811-37-83 | | port index table | |
| 811-37-84 | | preamble, <in a train communication network> | |
| 811-37-85 | | process data | |
| 811-37-86 | | process variable | |
| 811-37-87 | | producer, <in a train communication network> | |
| 811-37-88 | | publisher | |
| 811-37-89 | | queue | |
| 811-37-90 | | repeater, <in a train communication network> | |
| 811-37-91 | | ring topology | |
| 811-37-92 | | send queue | |
| 811-37-93 | | service, <in a train communication network> | |
| 811-37-94 | | session header | |
| 811-37-95 | | session layer | |
| 811-37-96 | | slave | |
| 811-37-97 | | slave frame | |
| 811-37-98 | | stub | |
| 811-37-99 | | subscriber | |
| 811-37-100 | | supervisory data | |
| 811-37-101 | | switch, <in a train communication network> | |
| 811-37-102 | | telegram, <in a train communication network> | |
| 811-37-103 | | terminator | |
| 811-37-104 | | terminator switch | |
| 811-37-105 | | topography | |
| 811-37-106 | | topology | |
| 811-37-107 | | train backbone | |
| 811-37-108 | | train communication network | |
| 811-37-109 | | train network address | |
| 811-37-110 | | train network management | |
| 811-37-111 | | transmitter | |
| 811-37-112 | | transport data | |
| 811-37-113 | | transport layer | |
| 811-37-114 | | trunk cable | |
| 811-37-115 | | wire train bus | |
| |